About Author

Morgan Howen

Morgan is an example author of everest news. She has just a dummy image & content. Sedut perspiciatis unde omnis iste natus error sit voluptatem accusantium doloremque

Windows 7 Stuck at Starting Windows | Fix Startup Stuck

When I turn on my computer and access the start window, it gets to the stamp of the windows start-up and Windows 7 Stuck at Starting Windows. The animation starts to act but won’t proceed further.

  1. When you start boot action on your computer and perform the safe mode, it stuck and can’t load CLASSPNP.SYS. It can freeze and won’t perform further action.
  2. A recover mode can lead to the resolution when you access it through the hard drive. However, it freezes at the hard drive.
  3. When you try to boot from the CD, which is available for the store can fix the problem. But even then, sometimes you are not able to access system restore, which gets stuck on the Starting Windows screen.
  4. One can use Windows CD to fix the issue and see if it works by an upgrade but is usually blocked by boot lock.
  5. When you change the BIOS to No option in its settings domain
  6. Sometimes plugging in the PSU cables and re-plugging can fix the problem.
  7. Most of the users Boot from the Ubuntu and install drivers which work fine. The issue can be with the USB port or network card.
  8. In some cases, you won’t see any problem with the system for some time, even when you don’t make any changes to the configuration. The problem can occur automatically without any update.
  9. You can also use start-up repair with the recovery CD can be a fix. Further changing your secondary hard drive or swapping memory can be an additional benefit.

You can find the resolution of windows 7 Stuck at Starting Windows with the fix provided above, and then you can proceed accordingly.

EDIT1: Further Fixes To Follow If Stuck at Starting Windows

  1. Use the option Regbackup and restore the files using the selective option.
  2. In some cases, we can try to use the boot CD and see the fix resolution.
  • In most of the cases, you can disable all system files in BIOS and remove everything which is connected and not required
  1. Sometimes changing the RAM and the combination with the other elements that can be swapped to and fro.
  2. Using the different GPUI can be worth a try
  3. Try to find the consumption of the power supply and limit the same to the minimum.
  • Try to rest the BIOS again and see the fix could be implemented correctly.
  • Upgrade can lead to the repair by changing it from FB to FD. In some cases, the motherboard can be a significant concern and hence need to replace the hard drive.

EDIT 2: Permanent fix using the Safe Boot Option


The various steps followed to go in safe mode are below:

  1. Click on the power button to turn on the computer.
  2. As you do so, simultaneously tap the F8 key on the keyboard.
  3. Keep tapping the F8 key will you see a black screen with multiple options on it?
  4. Use arrow keys and scroll up and down to choose the safe option mode with networking
  5. Once the option safe mode with networking has been highlighted, press the enter key on the keyboard.
  6. As you are in safe mode, you will see the pop-up message about the safe mode, which you can close without further delay.
  7. Once you do that, you can click on WINDOWS 7 LOGO and see if it is working to verify the problem being fixed, and you have stopped getting that message now.

In some cases, the graphical correction can be the resolution and even after trying to set up the system in varied ways and restart the system in safe boot. If it starts back, it can be a permanent fix, but sometime you may see it taking a lot of time, it may be more than a few hours.


Leave a Reply

Your email address will not be published. Required fields are marked *